Painted Teapot

Hi Everyone!  It’s been a while since I’ve posted a tutorial, so get ready, this one’s a doozy!

With Spring just around the corner I decided to make something with a fresh and springy feel.  While perusing the Christmas Tree Shop last weekend I found a pretty simple off white teapot, boring on it’s own, but it was less than $8 and I knew I could spruce it up!

  Off I went to Michaels (my local craft store) in search of some paint that would work.  I found Porcelaine, which is great on porcelain or ceramic.  I picked it up in a couple fun spring colors (Saffron Orange, Fuchsia, Turquoise, and White), and grabbed a pack of 2 applicator bottles:

 The applicator bottles are great and easy to use.  You just pour in your paint and screw on the top.  You can then either attach the saver top (which keeps your paint safe from drying out) or you can add the metal tip for painting.  It also comes with a little pin to stick in the metal top while you aren’t using it, to prevent it from getting clogged with dry paint.  Lovely!  And the best part about the paint is that it cleans up with warm soap and water.  My kinda project!

I was now in business!  The first thing I did was grab some left over .16 cent  tiles from my coaster project to practice on.  I tried a couple different ideas to see what looked good, and to also get a sense of what my applicator bottle felt like.  I highly suggest taking this extra time.  It was a waste of tile, but they were inexpensive and I wanted to get the feel of painting on porcelain rather than just practicing on paper:

 I wasn’t overly thrilled with what I was coming up with, but was feeling pretty comfortable with the applicator bottle, so I went online in search of a fairly simple Paisley Pattern.  I found this and printed it out:

I grabbed an old cereal box, flattened it out, and traced/cut out one of the large and one of the small paisleys.  I now had my template to work with!

I grabbed some good old scotch tape, attached a small piece to the back of my template, and attached it to the tile.  I then traced around the template with my applicator bottle using small dots of paint.  Unfortunately pencil doesn’t really stick to tile, otherwise you could trace your template first, and then go over it with paint.  Here is the process:

 I arranged my two sizes in different positions around the tile.  If I wanted it to face the other direction, I simple flipped over the cardboard and taped it upside down on the tile.  How easy was that?:

After a couple of different colored layers, I was pretty happy with where things were going.  I used the Turquoise straight out of the bottle, but added a little white to the Orange to make a spring yellow.

Now I was ready to give the teapot a go.  I followed the same steps, tape the template onto the teapot, trace around with small dots of paint, remove, and reapply.  I was careful to let the paint dry a little before removing my template because I didn’t want anything to smudge.  Here is how it started coming together:

 Because I only had 2 applicator bottles I was only able to do 2 colors at a time.  But it is important to let your paint dry a bit if you are putting colors near each other, otherwise they may bleed a bit.  Here is another shot of what the applicator bottles look like, and how my teapot started to progress:

 After the original trace around the template, I free handed the rest.  Not hard to do when you’re just staying inside a shape.  Once I was happy with my current layers, I washed out the Turquoise and added Fuchsia to my applicator bottle.  I also added a fair amount of white to this to make a nice spring pink.  I decided to make dots that tapered towards the point of my paisley.  This is really easy to do…the larger you want your dot, the harder you squeeze the bottle.  The smaller you want the dot, the lighter you squeeze the bottle.  Easy peasy:

I then filled in the rest of my pattern with yellow, took a step back and admired my hard work.  I played around with the tiles that I had made, as practice, and decided that I like the paisley by itself without any extra embellishments:

 Here is my finished teapot with the paint drying:

 The final step is to “fire” the pot in the oven.  This sets the paint and makes it dishwasher safe.  Crazy, huh?  Follow the directions on the back of the paint, mine said 35 minutes at a 300 degree oven.  Easy enough!  I love how this turned out, I think for now I’m going to leave the handle, spout, and lid plain white, but I might add a pattern to them as well.  Here she is all finished and sitting in the sun:

While I was out the other day I found these puppies:

You bet you’re booty they will be painted to match!  Along with a full set of coasters, at least that’s my plan for now!  We’ll see what the next few weeks actually allow me time for…

Happy almost spring everyone!


Simply Living

Cheap 2 Shelf Bookcase Makeover!

These days, the last thing I want to do is spend a ton of money on new furniture, particularly when they are things that I don’t necessarily need.  But, some of the cheap furniture out there looks just that, cheap.  Which isn’t the look I’m going for either.  So I’ve been trying to find ways to get the cheap furniture, and make it look more appealing.  Check out the $8 Ikea table I spruced up here!

With all these recent snow days, thank you New England, I wanted a project to work on while being stuck at home.  I took a quick trip to Ocean State Job Lot (for anyone not from around here, they have great prices, but not always the worlds best quality) and found a pretty sturdy looking 2 shelf bookcase, singing to the tune of $10, I was sold.  Next stop was good old home depot where I picked up a paint sample of Martha Stewart Living in Anvil.  Less than $3 for the sample…and that was all the paint I would need!

Check out my process of turning this:


into this:


 while spending a grand total of….$13!

First thing I did was to assemble the bookcase, then I took out my sanding block and some medium (100 grit) sand paper.

Sand paper, and a sanding block, which I like better than just using sandpaper folded up in my hand

It was important to rough up the surfaces to make sure my paint would stick.  If you were working with unfinished wood that was smooth you wouldn’t have use this step, but because my wood was already finished, I needed to scrape off the smooth veneer.

One side, sanded down

Next I took out the screws and made sure to sand down all the inside surfaces I couldn’t reach while it was put together. (Since the bookcase came unassembled you can just sand all the surfaces without putting it together first.  I chose to assemble it first to see how it looked before spending all the time painting.)

Here are all of my pieces laid out, sanded, and ready to be primed!

Ready for priming!

I had a left over Grey primer from a kitchen table and chairs I painted years ago before moving into my first apartment.  That was the perfect base for my darker grey paint.

 I have a little key for popping off the top of paint cans, but a flat screw driver would work fine too

Before priming I used tiny pieces of painters tape to cover up all the screw holes, so that they wouldn’t get painted shut.


I decided to use a small paint roller instead of a paintbrush in the hopes it would cover up brush lines.  So into the tray my primer went, and I was good to go!

Here is what my shelves look like primed:

Read the back of the paint for dry time!  My primer was dry to the touch in 30 minutes, ready for a second coat in 1 hour.  So an hour later I did a second coat.  Waited a couple hours….flipped all the boards over and primed the other side, and edges!  Then I waited over night for everything to dry thoroughly.

Next it was time for paint.  As I said, I chose the Martha Stewart Living in Anvil.  This is a really nice rich grey, originally I thought that I was going to go with Graphite, but after looking at the paint chips Anvil stole my heart.

Each paint tester comes with 8oz. of paint, which I knew would be just enough for my small bookcase.  The guys at Home Depot mix it right up for you, and for less than $3 it’s perfect for a small project or testing paint on your walls at home before taking the plunge.

I followed the same steps as I did for priming my shelves, except this paint took 3 hours to dry!  So 2 coats on each side later…it took most of the day!

After the final coat was on I let things dry overnight just to be on the safe side.  Then I removed the painters tape covering the screw holes, and was happy to see them safe and unblocked.

Now I had to decide on what pattern to paint onto my shelves.  I had seen the fabulous painted wallpaper Emily did over at Jones Design Company and was sold.  I printed her template, but adjusted the size by quite a bit, since my tiny bookshelf was much smaller than her expansive wall space.

Cut out template, and chalk for tracing

Since I had such a dark surface I used chalk to trace my template, rather than pencil.  Here’s what it looks like traced and ready to be painted.

Then I grabbed my white acrylic paint, a brush, and my make shift paint palette.  (remember how I talked about saving all the plastic inserts from my Christmas ornaments here.  This is what I was saving them for!)

Now it was time to get to work.  I followed the chalked out lines, and tried to stay on the inside of the lines.

Again, avoid filling in the screw holes!  Here is what my first side looks like finished:

Now I lined up the top to try and make my patter flow evenly.

I followed the same steps for the top and other side.  Trace outline in chalk, fill in with paint.  After allowing the paint time to dry, I assembled my bookcase.

Here’s a closeup, which shows that there was quite a bit of touch up work to do!

The bookcase did come with these little circle stickers to cover up the head of the screw.  I decided to stick them on and see if I could paint over them.  That way I don’t have to live with unsightly screws on the side of my bookcase, and if I ever decide to take apart the bookcase again, I don’t have to worry about scraping paint off of my screw first.

I then pulled out an angled brush to do my touch up work:

Here it is after, you can hardly see the circle sticker any more!

You can hardly see the circle sticker!

And here she is all put together, with a few space fillers on the shelves.

I’ll be sure to update when I find a permanent home for her.  Most likely next to my bed, but we shall see!  I’m thrilled with the outcome, what do you think?  It was a time consuming process (mostly waiting for paint to dry) and as I stated here, I don’t have the worlds steadiest painting hand, but overall I think my $10 bookcase looks much improved!  I’d say it was $13 well spent.  Maybe I need to go back for a matching one…

Simply Living